Factory High Quality Monel 400 Alloy Nickel Alloy Round Bar 10mm 15mm Monel 400 Rod
Product Description:
We produce High Temperature Superalloy round rods.
We melt good quality Ni-based Alloy round rods with Vacuum Furnaces and Induction Furnaces.
We can cast and machine the hard Nickel-based Alloy round rods as per the drawings.
We would like to help select suitable Ni-based Alloy Grade as per your specific working condition.
Nickel-based alloys have been in use for producing various components such as vanes or combustion chambers.The material can be implemented as wrought or as precision-cast parts or as centrifugal cast parts.The design of Nickel superalloys, which is aimed at an enhancement of both their oxidation resistance and their hot corrosion resistance, has received considerable impetus recently, especially since the advent of overlay coating techniques and the extensive studies which have been undertaken to elucidate the hot corrosion mechanisms and the effect of alloying elements.
Material:
- Alloy : Alloy 20/28/31;
- Hastelloy: Hastelloy B / B-2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N;
- Haynes: Haynes 230/556/188;
- Inconel: Inconel 100/600/601/602CA/617/625713/718738/X-750,Carpenter 20;
- Incoloy: Incoloy 800/800H/800HT/825/925/926;
- GH: GH2132,GH3030,GH3039,GH3128,GH4180,GH3044
- Monel: Monel 400/K500
- Nitronic: Nitronic 40/50/60;
- Nimonic: Nimonic 75/80A/90
Standard:
AISI,ASTM,DIN,EN,SUS,UNS etc
Technique:
Cold rolled,hot rolled,forged
The lowest level of Nickel ≥30%
| Name | | Monel 400(N04400) | Monel K500(N05500) |
| Chemmical Composition wt.% | Ni | 63.0-67.0 | 63.0-67.0 |
| Fe | ≤2.00 | ≤2.00 |
| C | ≤0.03 | ≤0.25 |
| Mn | ≤1.50 | ≤0.15 |
| P | - | - |
| Si | ≤0.50 | ≤1.00 |
| Cu | 28.0-34.0 | margin |
| S | - | ≤0.01 |
| Cr | - | - |
| Al | - | 2.0-4.0 |
| TI | - | 0.25-1.00 |
| Others | - | - |
| Product name | High Strength NO4400 Nickel Alloy Rod Monel 400 Nickel Bar |
| Standard | ASTM,ASME |
| Diameter | 3-480mm or customized |
| Length | 3000mm,4000mm,5800mm,6000mm,12000mm, or as required |
| Density | 8.9cm3 |
| Nickel Content | 58% |
| Lead Time | 7-15 working days after the receipt of 30% deposit |
| Payment Terms | 30% TT for deposit,70% TT/LC at sight balance before shipment |
| Price terms | FOB EXW CIF CFR |
| Packing | Wooden Pallet or according to customer's requirements |
Application
- Sour-gas service applications
- Oil and gas production safety lifts and valves
- Oil-well tools and instruments like drill collars
- Oil well industry
- Doctor blades and scrapers
- Chains, cables, springs, valve trim, fasteners for marine service
- Pump shafts and impellers in marine service
Mechanical Properties
Typical Room Temperature Tensile Properties of Annealed Material
| Product Form | Condition | Tensile (ksi) | .2% Yield (ksi) | Elongation % | Hardness |
| Rod & Bar | Hot-Finished/Aged | 140-190 | 100-150 | 30-20 | 27-38 HRC |
| Rod & Bar | Hot Finished/Annealed | 90-110 | 40-60 | 45-25 | 75-90 HRB |
| Rod & Bar | Hot Finished/Annealed/Aged | 130-165 | 85-120 | 35-20 | 24-35 HRC |
| Rod & Bar | Cold-Drawn/Aged | 135-185 | 95-160 | 30-15 | 25-41 HRC |
| Rod & Bar | Cold-Drawn/Annealed/Aged | 130-190 | 85-120 | 30-20 | 24-35 HRC |
| Plate | ot-Finished/Aged | 140-180 | 100-135 | 30-20 | 27-37 HRC |
| Sheet | Cold-Rolled/Annealed | 90-105 | 40-65 | 45-25 | 85 HRB Max |
Oem service:
Welcome customized size
We are experience factory for OEM&ODM service
Product Available Size:
- Wires: Diameter0.5~7.5mm
- Rods:Diameter8.0~200mm
- Strip:Thickness0.5~2.5mm, Width5~180mm
- Plate: Customized
- Tube: Customized
After sale service:
24 hours on for after sale service
trade assurance
